Difference between PCB router and V-groove PCB depanelizer

1. Comparing with v-groove PCB depanelizer, PCB depaneling router is more stable because it is controlled by PC which is no need to adjust upper blade and lower blade alignment.

2. In order to ensure longer life time for routing bit, we design routing processing by different section. For example, use the first 2mm(A) to depanel 1st milling joint, then use middle 2mm(B) to depanel the 2nd milling joint, and use the third 2mm(C) to depanel the 3rd milling point...(please see below picture for routing bit)

3. If routing bit break during processing, machine will alarm and stop working. It could also record processing when power off.

4. We used Germany KAVO Spindle with 60000rmp.

5. AUTO MARK offset system.CCD image could check&simulate the path or routing to reduce unnecessary mistake before cutting.

6. Two sliding table provides simultaneously in-and-out movement to reduce the tack time for better productivity.

7. TaiWan Vacuum Cleaner to make sure that there is no rust during routing to protect the environment of workshop, ensure operator safety and health.

Manual PCB Depaneling Machine Which is Popular with Canada Factories

Manual PCB Depaneling Machines
http://pcb-depaneling.com/index.php/list/index/id/64.html

Features:
●Round knife, manually cutting against lower linear knife, for reduced stress
●Separate pre-scored PCB assembly without stress on either PCB or component
●Separating speed is adjusted by handwheel
●Handle Intermittent scoring or cut-outs
●Board with projected component can be cut precisely
●Large stainless steel platform on both side of cutting blade prevents board wobble and table height and angle are adjustable.
●Clearance between circular and linear blades are adjustable to fit different groove depth and compensates for blade wear out .

Manual PCB Depaneling Canada Customers:
Creation & Horner

Manual PCB Depaneling Machines:
1. CWV-1M460 with 460mm cutting capacity
2. CWV-1M700 with No Limit cutting capacity
3. CWV-1M1000 with No Limit cutting capacity

CWV-1M700, Manual PCB Depaneling Machine

Lowest Cost of PCB Depanelizer only Cost You USD700

Lowest Cost of PCB Depanelizer only Cost USD700!

Features:
1. 2 circular blades to separate
2. Depaneling speed could be adjustable
3. Very easy to operate
4. Suitable for FR4 & Aluminium boards

Watch V-groove PCB separator Video

Specification:

Model	CWVC-1SJ
PCB Cutting Length (mm)	no limit
Cutting Speed (mm/s)	0~400
Cutting Thickness (mm)	1.0~3.5
Power Supply	110/220 V
Size (mm)	420*280*400
Weight (Kg)	25
Guarantee	1 Year
Delivery	1 Day
Ability	1000 Sets
Min. Order	1 Set

PCB Depanelizer, CWVC-1SJ

High Efficiency Automatic PCB Depanel from ChuangWei

Automatic PCB Depanel, CWV-1A460 Features:

1.Has 460mm cutting capacity.

2.Large LCD display with counter function. 
3.Could set blade travelling length.

for example, you have 200mm long PCB, could set 200mm stroke in the LCD to improve cutting efficiency. 
4.Have safety sensor to protect hands. When operator put hands near the circular blade, machine stop working.

This PCB depanel is very safe in your production line.

For more info, please visit us at http://pcb-depanelizer.com/index.php/photo/index/id/33.html

Automatic PCB Depanel, CWV-1A460

LED Industry PCB Separator

Upon now, PCB Separator model CWVC-3S has become our best hot selling models for LED strip cutting with a special design which uses 3 blade sets to finish the whole cutting.The first blade set cuts 20% of the PCB v-groove, the second blade set cuts 40% of the PCB v-groove, and the third blade set cuts the last 40% to finish depaneling. Comparing with the traditional way, cutting stress reduced more than 80%. Besides, PCB is level and smooth without warp after depaneling.

Clients could also select the suitable cutting speed according to their needs.

In order to meet larger capacity, we also have a model CWVC-4S which separate 2 PCBs at the same time!

Both this 2 models have no limit on cutting capacity.

CWVC-3S, PCB Separator

Pneumatic PCB Separator Machine with Less Cutting Stress

This PCB Separator uses 2 horizontal knives to separate without stress and will not damage parts as close as 0.5mm from score line, and operator cannot misfeed the board.

http://pcba-separator.com/index.php/photo/index/id/59.html

Feature:
1.Pneumatically driven and electromagnetic valve control.
2.Depaneling process without vibrations due to pneumatic drive unit . machine 
3.Depaneling PCBs with sensitive SMD, capacitors or thin board even to 0.3mm can be separated safely. 
4.Depaneling operation is that operator stamps the foot pedal to Depanel PCB.
5.Highest components near the v groove of PCB can be up to 70mm. 
6.The minimum distance is allowed to be 0.5mm between  V groove and the electronic components.
7.Gap for insertion of PCB can be easy to adjust by the adjusting knob in front of the machine.

Pneumatic PCB Separator Models:
1. CWVC-200 with 200mm cutting capacity
2. CWVC-330 with 330mm cutting capacity
3. CWVC-400 with 400mm cutting capacity
4. CWVC-450 with 450mm cutting capacity
5. CWVC-480 with 480mm cutting capacity
Other cutting length could be customized made according to your needs!
Contact us for more details!

CWVC-450

PCB Depaneling Machine Packaging

In order to make our machines with better quality, we spend higher cost on the plywooden case which has no requirements to do fumigation and we will drill holes on both sides of machine, then use big screws to lock the depaneling machine on the wooden case base.
Also, we will use 4 long screws to lock the wooden case on 4 corners as below pictures, so that clients are easy to open the case.